Booting Linux on physical CPU 0x0
Linux version 4.13.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC)) #1 Tue Jun 26 15:58:59 +03 2018
CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: Atmel SAMA5D35-EK
Memory policy: Data cache writeback
cma: Failed to reserve 64 MiB
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c0a31c28, node_mem_map c7efb000
  Normal zone: 256 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 32768 pages, LIFO batch:7
CPU: All CPU(s) started in SVC mode.
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
Kernel command line: console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs w1-therm.strong_pullup=2
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120100K/131072K available (6144K kernel code, 202K rwdata, 1500K rodata, 1024K init, 178K bss, 10972K reserved, 0K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0700000   (7136 kB)
      .init : 0xc0900000 - 0xc0a00000   (1024 kB)
      .data : 0xc0a00000 - 0xc0a32880   ( 203 kB)
       .bss : 0xc0a37d10 - 0xc0a648dc   ( 179 kB)
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14479245754 ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
Console: colour dummy device 80x30
Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x20100000 - 0x20100060
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
random: get_random_u32 called from bucket_table_alloc+0x84/0x1bc with crng_init=0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
AT91: PM: standby: standby, suspend: ulp0
gpio-at91 fffff200.gpio: at address c885c200
gpio-at91 fffff400.gpio: at address c885e400
gpio-at91 fffff600.gpio: at address c8881600
gpio-at91 fffff800.gpio: at address c8883800
gpio-at91 fffffa00.gpio: at address c8885a00
pinctrl-at91 ahb:apb:pinctrl@fffff200: initialized AT91 pinctrl driver
tcb_clksrc: tc0 at 16.000 MHz
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115833966437 ns
at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
AT91: Detected SoC family: sama5d3
AT91: Detected SoC: sama5d35, revision 2
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=15 bucket_order=0
random: fast init done
io scheduler noop registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
f001c000.serial: ttyS1 at MMIO 0xf001c000 (irq = 21, base_baud = 4125000) is a ATMEL_SERIAL
f0020000.serial: ttyS2 at MMIO 0xf0020000 (irq = 22, base_baud = 4125000) is a ATMEL_SERIAL
f0024000.serial: ttyS5 at MMIO 0xf0024000 (irq = 23, base_baud = 4125000) is a ATMEL_SERIAL
ffffee00.serial: ttyS0 at MMIO 0xffffee00 (irq = 35, base_baud = 8250000) is a ATMEL_SERIAL
console [ttyS0] enabled
brd: module loaded
loop: module loaded
atmel_spi f0004000.spi: DMA TX channel not available, SPI unable to use DMA
atmel_spi f0004000.spi: Atmel SPI Controller using PIO only
atmel_spi f0004000.spi: Atmel SPI Controller version 0x213 at 0xf0004000 (irq 19)
atmel_spi f8008000.spi: DMA TX channel not available, SPI unable to use DMA
atmel_spi f8008000.spi: Atmel SPI Controller using PIO only
atmel_spi f8008000.spi: Atmel SPI Controller version 0x213 at 0xf8008000 (irq 26)
libphy: Fixed MDIO Bus: probed
CAN device driver interface
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin pioD14 already requested by f0004000.spi; cannot claim for f000c000.can
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin-110 (f000c000.can) status -22
pinctrl-at91 ahb:apb:pinctrl@fffff200: could not request pin 110 (pioD14) from group can0_rx_tx  on device ahb:apb:pinctrl@fffff200
at91_can f000c000.can: Error applying setting, reverse things back
at91_can: probe of f000c000.can failed with error -22
libphy: MACB_mii_bus: probed
macb f0028000.ethernet (unnamed net_device) (uninitialized): no PHY found
libphy: MACB_mii_bus: probed
Micrel KSZ8081 or KSZ8091 f802c000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=f802c000.ethernet-ffffffff:01, irq=207)
macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 44 (16:31:1d:86:bd:4c)
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
atmel-ehci 700000.ehci: EHCI Host Controller
atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
atmel-ehci 700000.ehci: irq 48, io mem 0x00700000
atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.12 ehci_hcd
usb usb1: SerialNumber: 700000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci 600000.ohci: failed to request gpio "overcurrent" IRQ
at91_ohci 600000.ohci: failed to request gpio "overcurrent" IRQ
at91_ohci 600000.ohci: failed to request gpio "overcurrent" IRQ
at91_ohci 600000.ohci: failed to find sfr node
at91_ohci 600000.ohci: USB Host Controller
at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 600000.ohci: irq 48, io mem 0x00600000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: USB Host Controller
usb usb2: Manufacturer: Linux 4.13.12 ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
at91_rtc fffffeb0.rtc: registered as rtc0
at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
i2c /dev entries driver
Driver for 1-wire Dallas network protocol.
AT91: Starting after wakeup
at91_wdt fffffe40.watchdog: watchdog is disabled
at91_wdt: probe of fffffe40.watchdog failed with error -22
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin pioD17 already requested by f001c000.serial; cannot claim for f0000000.mmc
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin-113 (f0000000.mmc) status -22
pinctrl-at91 ahb:apb:pinctrl@fffff200: could not request pin 113 (pioD17) from group mmc0_cd  on device ahb:apb:pinctrl@fffff200
atmel_mci f0000000.mmc: Error applying setting, reverse things back
atmel_mci: probe of f0000000.mmc failed with error -22
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin pioD18 already requested by f001c000.serial; cannot claim for f8000000.mmc
pinctrl-at91 ahb:apb:pinctrl@fffff200: pin-114 (f8000000.mmc) status -22
pinctrl-at91 ahb:apb:pinctrl@fffff200: could not request pin 114 (pioD18) from group mmc1_cd  on device ahb:apb:pinctrl@fffff200
atmel_mci f8000000.mmc: Error applying setting, reverse things back
atmel_mci: probe of f8000000.mmc failed with error -22
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
atmel_aes f8038000.aes: version: 0x135
atmel_aes f8038000.aes: Atmel AES - Using dma1chan0, dma1chan1 for DMA transfers
atmel_sha f8034000.sha: version: 0x410
atmel_sha f8034000.sha: using dma1chan2 for DMA transfers
atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
atmel_tdes f803c000.tdes: version: 0x701
atmel_tdes f803c000.tdes: using dma1chan3, dma1chan4 for DMA transfers
atmel_tdes f803c000.tdes: Atmel DES/TDES
fbtft_of_value: buswidth = 8
fbtft_of_value: debug = 0
fbtft_of_value: fps = 100
graphics fb0: fb_ssd1322 frame buffer, 256x64, 32 KiB video memory, 8 KiB buffer memory, fps=100, spi32766.1 at 20 MHz
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
random: crng init done
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
7 cmdlinepart partitions found on MTD device atmel_nand
Creating 7 MTD partitions on "atmel_nand":
0x000000000000-0x000000040000 : "bootstrap"
0x000000040000-0x000000100000 : "uboot"
0x000000100000-0x000000140000 : "env_redundant"
0x000000140000-0x000000180000 : "env"
0x000000180000-0x000000200000 : "dtb"
0x000000200000-0x000000800000 : "kernel"
0x000000800000-0x000010000000 : "rootfs"
iio iio:device0: Resolution used: 12 bits
iio iio:device0: ADC Touch screen is disabled.
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20170425 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20170425)
can: broadcast manager protocol (rev 20170425 t)
can: netlink gateway (rev 20170425) max_hops=1
ubi0: default fastmap pool size: 95
ubi0: default fastmap WL pool size: 47
ubi0: attaching mtd6
ubi0: scanning is finished
ubi0: attached mtd6 (name "rootfs", size 248 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1980, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 178/43, WL threshold: 4096, image sequence number: 1773071834
ubi0: available PEBs: 0, total reserved PEBs: 1980, PEBs reserved for bad PEB handling: 36
input: gpio_keys as /devices/platform/gpio_keys/input/input0
ubi0: background thread "ubi_bgt0d" started, PID 85
at91_rtc fffffeb0.rtc: setting system clock to 2019-11-12 09:11:20 UTC (1573549880)
ALSA device list:
  No soundcards found.
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery deferred
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 244682752 bytes (233 MiB, 1927 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 41D03A02-BE01-4371-8E89-377653F41E56, small LPT model
VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 1024K
udevd[116]: starting version 3.2.1
udevd[117]: starting eudev-3.2.1
UBIFS (ubi0:0): completing deferred recovery
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 167
UBIFS (ubi0:0): deferred recovery completed
