source: S-port/trunk/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_sub_f32.c

Last change on this file was 1, checked in by AlexLir, 3 years ago
File size: 3.7 KB
Line 
1/* ----------------------------------------------------------------------
2 * Project: CMSIS DSP Library
3 * Title: arm_sub_f32.c
4 * Description: Floating-point vector subtraction.
5 *
6 * $Date: 27. January 2017
7 * $Revision: V.1.5.1
8 *
9 * Target Processor: Cortex-M cores
10 * -------------------------------------------------------------------- */
11/*
12 * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
13 *
14 * SPDX-License-Identifier: Apache-2.0
15 *
16 * Licensed under the Apache License, Version 2.0 (the License); you may
17 * not use this file except in compliance with the License.
18 * You may obtain a copy of the License at
19 *
20 * www.apache.org/licenses/LICENSE-2.0
21 *
22 * Unless required by applicable law or agreed to in writing, software
23 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
24 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
25 * See the License for the specific language governing permissions and
26 * limitations under the License.
27 */
28
29#include "arm_math.h"
30
31/**
32 * @ingroup groupMath
33 */
34
35/**
36 * @defgroup BasicSub Vector Subtraction
37 *
38 * Element-by-element subtraction of two vectors.
39 *
40 * <pre>
41 * pDst[n] = pSrcA[n] - pSrcB[n], 0 <= n < blockSize.
42 * </pre>
43 *
44 * There are separate functions for floating-point, Q7, Q15, and Q31 data types.
45 */
46
47/**
48 * @addtogroup BasicSub
49 * @{
50 */
51
52
53/**
54 * @brief Floating-point vector subtraction.
55 * @param[in] *pSrcA points to the first input vector
56 * @param[in] *pSrcB points to the second input vector
57 * @param[out] *pDst points to the output vector
58 * @param[in] blockSize number of samples in each vector
59 * @return none.
60 */
61
62void arm_sub_f32(
63 float32_t * pSrcA,
64 float32_t * pSrcB,
65 float32_t * pDst,
66 uint32_t blockSize)
67{
68 uint32_t blkCnt; /* loop counter */
69
70#if defined (ARM_MATH_DSP)
71
72/* Run the below code for Cortex-M4 and Cortex-M3 */
73 float32_t inA1, inA2, inA3, inA4; /* temporary variables */
74 float32_t inB1, inB2, inB3, inB4; /* temporary variables */
75
76 /*loop Unrolling */
77 blkCnt = blockSize >> 2U;
78
79 /* First part of the processing with loop unrolling. Compute 4 outputs at a time.
80 ** a second loop below computes the remaining 1 to 3 samples. */
81 while (blkCnt > 0U)
82 {
83 /* C = A - B */
84 /* Subtract and then store the results in the destination buffer. */
85 /* Read 4 input samples from sourceA and sourceB */
86 inA1 = *pSrcA;
87 inB1 = *pSrcB;
88 inA2 = *(pSrcA + 1);
89 inB2 = *(pSrcB + 1);
90 inA3 = *(pSrcA + 2);
91 inB3 = *(pSrcB + 2);
92 inA4 = *(pSrcA + 3);
93 inB4 = *(pSrcB + 3);
94
95 /* dst = srcA - srcB */
96 /* subtract and store the result */
97 *pDst = inA1 - inB1;
98 *(pDst + 1) = inA2 - inB2;
99 *(pDst + 2) = inA3 - inB3;
100 *(pDst + 3) = inA4 - inB4;
101
102
103 /* Update pointers to process next sampels */
104 pSrcA += 4U;
105 pSrcB += 4U;
106 pDst += 4U;
107
108 /* Decrement the loop counter */
109 blkCnt--;
110 }
111
112 /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
113 ** No loop unrolling is used. */
114 blkCnt = blockSize % 0x4U;
115
116#else
117
118 /* Run the below code for Cortex-M0 */
119
120 /* Initialize blkCnt with number of samples */
121 blkCnt = blockSize;
122
123#endif /* #if defined (ARM_MATH_DSP) */
124
125 while (blkCnt > 0U)
126 {
127 /* C = A - B */
128 /* Subtract and then store the results in the destination buffer. */
129 *pDst++ = (*pSrcA++) - (*pSrcB++);
130
131 /* Decrement the loop counter */
132 blkCnt--;
133 }
134}
135
136/**
137 * @} end of BasicSub group
138 */
Note: See TracBrowser for help on using the repository browser.