source: S-port/trunk/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h@ 1

Last change on this file since 1 was 1, checked in by AlexLir, 2 years ago
File size: 37.6 KB
Line 
1/**
2 ******************************************************************************
3 * @file stm32f4xx_hal_sd.h
4 * @author MCD Application Team
5 * @brief Header file of SD HAL module.
6 ******************************************************************************
7 * @attention
8 *
9 * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
10 * All rights reserved.</center></h2>
11 *
12 * This software component is licensed by ST under BSD 3-Clause license,
13 * the "License"; You may not use this file except in compliance with the
14 * License. You may obtain a copy of the License at:
15 * opensource.org/licenses/BSD-3-Clause
16 *
17 ******************************************************************************
18 */
19
20/* Define to prevent recursive inclusion -------------------------------------*/
21#ifndef STM32F4xx_HAL_SD_H
22#define STM32F4xx_HAL_SD_H
23
24#ifdef __cplusplus
25 extern "C" {
26#endif
27
28#if defined(SDIO)
29
30/* Includes ------------------------------------------------------------------*/
31#include "stm32f4xx_ll_sdmmc.h"
32
33/** @addtogroup STM32F4xx_HAL_Driver
34 * @{
35 */
36
37/** @defgroup SD SD
38 * @brief SD HAL module driver
39 * @{
40 */
41
42/* Exported types ------------------------------------------------------------*/
43/** @defgroup SD_Exported_Types SD Exported Types
44 * @{
45 */
46
47/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
48 * @{
49 */
50typedef enum
51{
52 HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
53 HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
54 HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
55 HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
56 HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
57 HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receiving State */
58 HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfer State */
59 HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
60}HAL_SD_StateTypeDef;
61/**
62 * @}
63 */
64
65/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
66 * @{
67 */
68typedef uint32_t HAL_SD_CardStateTypeDef;
69
70#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */
71#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
72#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
73#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
74#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
75#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
76#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
77#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
78#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */
79/**
80 * @}
81 */
82
83/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
84 * @{
85 */
86#define SD_InitTypeDef SDIO_InitTypeDef
87#define SD_TypeDef SDIO_TypeDef
88
89/**
90 * @brief SD Card Information Structure definition
91 */
92typedef struct
93{
94 uint32_t CardType; /*!< Specifies the card Type */
95
96 uint32_t CardVersion; /*!< Specifies the card version */
97
98 uint32_t Class; /*!< Specifies the class of the card class */
99
100 uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
101
102 uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
103
104 uint32_t BlockSize; /*!< Specifies one block size in bytes */
105
106 uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
107
108 uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
109
110}HAL_SD_CardInfoTypeDef;
111
112/**
113 * @brief SD handle Structure definition
114 */
115#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
116typedef struct __SD_HandleTypeDef
117#else
118typedef struct
119#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
120{
121 SD_TypeDef *Instance; /*!< SD registers base address */
122
123 SD_InitTypeDef Init; /*!< SD required parameters */
124
125 HAL_LockTypeDef Lock; /*!< SD locking object */
126
127 uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
128
129 uint32_t TxXferSize; /*!< SD Tx Transfer size */
130
131 uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
132
133 uint32_t RxXferSize; /*!< SD Rx Transfer size */
134
135 __IO uint32_t Context; /*!< SD transfer context */
136
137 __IO HAL_SD_StateTypeDef State; /*!< SD card State */
138
139 __IO uint32_t ErrorCode; /*!< SD Card Error codes */
140
141 DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
142
143 DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
144
145 HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
146
147 uint32_t CSD[4]; /*!< SD card specific data table */
148
149 uint32_t CID[4]; /*!< SD card identification number table */
150
151#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
152 void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
153 void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
154 void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
155 void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
156
157 void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
158 void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
159#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
160}SD_HandleTypeDef;
161
162/**
163 * @}
164 */
165
166/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
167 * @{
168 */
169typedef struct
170{
171 __IO uint8_t CSDStruct; /*!< CSD structure */
172 __IO uint8_t SysSpecVersion; /*!< System specification version */
173 __IO uint8_t Reserved1; /*!< Reserved */
174 __IO uint8_t TAAC; /*!< Data read access time 1 */
175 __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
176 __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
177 __IO uint16_t CardComdClasses; /*!< Card command classes */
178 __IO uint8_t RdBlockLen; /*!< Max. read data block length */
179 __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
180 __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
181 __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
182 __IO uint8_t DSRImpl; /*!< DSR implemented */
183 __IO uint8_t Reserved2; /*!< Reserved */
184 __IO uint32_t DeviceSize; /*!< Device Size */
185 __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
186 __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
187 __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
188 __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
189 __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
190 __IO uint8_t EraseGrSize; /*!< Erase group size */
191 __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
192 __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
193 __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
194 __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
195 __IO uint8_t WrSpeedFact; /*!< Write speed factor */
196 __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
197 __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
198 __IO uint8_t Reserved3; /*!< Reserved */
199 __IO uint8_t ContentProtectAppli; /*!< Content protection application */
200 __IO uint8_t FileFormatGroup; /*!< File format group */
201 __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
202 __IO uint8_t PermWrProtect; /*!< Permanent write protection */
203 __IO uint8_t TempWrProtect; /*!< Temporary write protection */
204 __IO uint8_t FileFormat; /*!< File format */
205 __IO uint8_t ECC; /*!< ECC code */
206 __IO uint8_t CSD_CRC; /*!< CSD CRC */
207 __IO uint8_t Reserved4; /*!< Always 1 */
208}HAL_SD_CardCSDTypeDef;
209/**
210 * @}
211 */
212
213/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
214 * @{
215 */
216typedef struct
217{
218 __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
219 __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
220 __IO uint32_t ProdName1; /*!< Product Name part1 */
221 __IO uint8_t ProdName2; /*!< Product Name part2 */
222 __IO uint8_t ProdRev; /*!< Product Revision */
223 __IO uint32_t ProdSN; /*!< Product Serial Number */
224 __IO uint8_t Reserved1; /*!< Reserved1 */
225 __IO uint16_t ManufactDate; /*!< Manufacturing Date */
226 __IO uint8_t CID_CRC; /*!< CID CRC */
227 __IO uint8_t Reserved2; /*!< Always 1 */
228
229}HAL_SD_CardCIDTypeDef;
230/**
231 * @}
232 */
233
234/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
235 * @{
236 */
237typedef struct
238{
239 __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
240 __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
241 __IO uint16_t CardType; /*!< Carries information about card type */
242 __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
243 __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
244 __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
245 __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
246 __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
247 __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
248 __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
249
250}HAL_SD_CardStatusTypeDef;
251/**
252 * @}
253 */
254
255#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
256/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
257 * @{
258 */
259typedef enum
260{
261 HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
262 HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
263 HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
264 HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
265
266 HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
267 HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
268}HAL_SD_CallbackIDTypeDef;
269/**
270 * @}
271 */
272
273/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
274 * @{
275 */
276typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
277/**
278 * @}
279 */
280#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
281/**
282 * @}
283 */
284
285/* Exported constants --------------------------------------------------------*/
286/** @defgroup SD_Exported_Constants Exported Constants
287 * @{
288 */
289
290#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
291
292/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
293 * @{
294 */
295#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
296#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
297#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
298#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
299#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
300#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
301#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
302#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
303#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
304 number of transferred bytes does not match the block length */
305#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
306#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
307#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
308#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
309 command or if there was an attempt to access a locked card */
310#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
311#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
312#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
313#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
314#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
315#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
316#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
317#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
318#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
319#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
320#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
321 of erase sequence command was received */
322#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
323#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
324#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
325#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
326#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
327#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
328#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
329#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
330#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
331
332#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
333#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
334#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
335/**
336 * @}
337 */
338
339/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
340 * @{
341 */
342#define SD_CONTEXT_NONE 0x00000000U /*!< None */
343#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
344#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
345#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
346#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
347#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
348#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
349
350/**
351 * @}
352 */
353
354/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
355 * @{
356 */
357#define CARD_SDSC 0x00000000U /*!< SD Standard Capacity <2Go */
358#define CARD_SDHC_SDXC 0x00000001U /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
359#define CARD_SECURED 0x00000003U
360
361/**
362 * @}
363 */
364
365/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
366 * @{
367 */
368#define CARD_V1_X 0x00000000U
369#define CARD_V2_X 0x00000001U
370/**
371 * @}
372 */
373
374/**
375 * @}
376 */
377
378/* Exported macro ------------------------------------------------------------*/
379/** @defgroup SD_Exported_macros SD Exported Macros
380 * @brief macros to handle interrupts and specific clock configurations
381 * @{
382 */
383/** @brief Reset SD handle state.
384 * @param __HANDLE__ : SD handle.
385 * @retval None
386 */
387#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
388#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
389 (__HANDLE__)->State = HAL_SD_STATE_RESET; \
390 (__HANDLE__)->MspInitCallback = NULL; \
391 (__HANDLE__)->MspDeInitCallback = NULL; \
392 } while(0)
393#else
394#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
395#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
396
397/**
398 * @brief Enable the SD device.
399 * @retval None
400 */
401#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
402
403/**
404 * @brief Disable the SD device.
405 * @retval None
406 */
407#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
408
409/**
410 * @brief Enable the SDMMC DMA transfer.
411 * @retval None
412 */
413#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
414
415/**
416 * @brief Disable the SDMMC DMA transfer.
417 * @retval None
418 */
419#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
420
421/**
422 * @brief Enable the SD device interrupt.
423 * @param __HANDLE__: SD Handle
424 * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
425 * This parameter can be one or a combination of the following values:
426 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
427 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
428 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
429 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
430 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
431 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
432 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
433 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
434 * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
435 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
436 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
437 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
438 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
439 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
440 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
441 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
442 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
443 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
444 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
445 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
446 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
447 * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
448 * @retval None
449 */
450#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
451
452/**
453 * @brief Disable the SD device interrupt.
454 * @param __HANDLE__: SD Handle
455 * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
456 * This parameter can be one or a combination of the following values:
457 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
458 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
459 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
460 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
461 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
462 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
463 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
464 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
465 * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
466 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
467 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
468 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
469 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
470 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
471 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
472 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
473 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
474 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
475 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
476 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
477 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
478 * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
479 * @retval None
480 */
481#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
482
483/**
484 * @brief Check whether the specified SD flag is set or not.
485 * @param __HANDLE__: SD Handle
486 * @param __FLAG__: specifies the flag to check.
487 * This parameter can be one of the following values:
488 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
489 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
490 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
491 * @arg SDIO_FLAG_DTIMEOUT: Data timeout
492 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
493 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
494 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
495 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
496 * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
497 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
498 * @arg SDIO_FLAG_CMDACT: Command transfer in progress
499 * @arg SDIO_FLAG_TXACT: Data transmit in progress
500 * @arg SDIO_FLAG_RXACT: Data receive in progress
501 * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
502 * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
503 * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
504 * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
505 * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
506 * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
507 * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
508 * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
509 * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
510 * @retval The new state of SD FLAG (SET or RESET).
511 */
512#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
513
514/**
515 * @brief Clear the SD's pending flags.
516 * @param __HANDLE__: SD Handle
517 * @param __FLAG__: specifies the flag to clear.
518 * This parameter can be one or a combination of the following values:
519 * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
520 * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
521 * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
522 * @arg SDIO_FLAG_DTIMEOUT: Data timeout
523 * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
524 * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
525 * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
526 * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
527 * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
528 * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
529 * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received
530 * @retval None
531 */
532#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
533
534/**
535 * @brief Check whether the specified SD interrupt has occurred or not.
536 * @param __HANDLE__: SD Handle
537 * @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
538 * This parameter can be one of the following values:
539 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
540 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
541 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
542 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
543 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
544 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
545 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
546 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
547 * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
548 * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
549 * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
550 * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
551 * @arg SDIO_IT_RXACT: Data receive in progress interrupt
552 * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
553 * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
554 * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
555 * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
556 * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
557 * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
558 * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
559 * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
560 * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
561 * @retval The new state of SD IT (SET or RESET).
562 */
563#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
564
565/**
566 * @brief Clear the SD's interrupt pending bits.
567 * @param __HANDLE__: SD Handle
568 * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
569 * This parameter can be one or a combination of the following values:
570 * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
571 * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
572 * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
573 * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
574 * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
575 * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
576 * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
577 * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
578 * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
579 * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt
580 * @retval None
581 */
582#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
583
584/**
585 * @}
586 */
587
588/* Exported functions --------------------------------------------------------*/
589/** @defgroup SD_Exported_Functions SD Exported Functions
590 * @{
591 */
592
593/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
594 * @{
595 */
596HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
597HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
598HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
599void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
600void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
601/**
602 * @}
603 */
604
605/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
606 * @{
607 */
608/* Blocking mode: Polling */
609HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
610HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
611HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
612/* Non-Blocking mode: IT */
613HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
614HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
615/* Non-Blocking mode: DMA */
616HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
617HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
618
619void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
620
621/* Callback in non blocking modes (DMA) */
622void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
623void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
624void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
625void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
626
627#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
628/* SD callback registering/unregistering */
629HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback);
630HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId);
631#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
632
633/**
634 * @}
635 */
636
637/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
638 * @{
639 */
640HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
641/**
642 * @}
643 */
644
645/** @defgroup SD_Exported_Functions_Group4 SD card related functions
646 * @{
647 */
648HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
649HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
650HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
651HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
652HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
653HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
654/**
655 * @}
656 */
657
658/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
659 * @{
660 */
661HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
662uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
663/**
664 * @}
665 */
666
667/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
668 * @{
669 */
670HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
671HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
672/**
673 * @}
674 */
675
676/* Private types -------------------------------------------------------------*/
677/** @defgroup SD_Private_Types SD Private Types
678 * @{
679 */
680
681/**
682 * @}
683 */
684
685/* Private defines -----------------------------------------------------------*/
686/** @defgroup SD_Private_Defines SD Private Defines
687 * @{
688 */
689
690/**
691 * @}
692 */
693
694/* Private variables ---------------------------------------------------------*/
695/** @defgroup SD_Private_Variables SD Private Variables
696 * @{
697 */
698
699/**
700 * @}
701 */
702
703/* Private constants ---------------------------------------------------------*/
704/** @defgroup SD_Private_Constants SD Private Constants
705 * @{
706 */
707
708/**
709 * @}
710 */
711
712/* Private macros ------------------------------------------------------------*/
713/** @defgroup SD_Private_Macros SD Private Macros
714 * @{
715 */
716
717/**
718 * @}
719 */
720
721/* Private functions prototypes ----------------------------------------------*/
722/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
723 * @{
724 */
725
726/**
727 * @}
728 */
729
730/* Private functions ---------------------------------------------------------*/
731/** @defgroup SD_Private_Functions SD Private Functions
732 * @{
733 */
734
735/**
736 * @}
737 */
738
739
740/**
741 * @}
742 */
743
744/**
745 * @}
746 */
747
748/**
749 * @}
750 */
751
752#endif /* SDIO */
753
754#ifdef __cplusplus
755}
756#endif
757
758
759#endif /* STM32F4xx_HAL_SD_H */
760
761/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Note: See TracBrowser for help on using the repository browser.