Обновлены пакеты libsqlite3 и sqlite3

Пакеты libsqlite3 и sqlite3 обновлены с версии 3.6.23.1 до версии 3.8.11.1. Изменения в sqlite3 от версии 3.6.23.1 до версии 3.8.11.1:

2013-10-17 - Release 3.8.1

SQLite version 3.8.1 is a regularly scheduled maintenance release. Upgrading from the previous release is optional, though you should upgrade if you are using partial indices as there was a bug related to partial indices in the previous release that could result in an incorrect answer for count(*) queries.

The next generation query planner that was premiered in the previous release continues to work well. The new query planner has been tweaked slightly in the current release to help it make better decisions in some cases, but is largely unchanged. Two new SQL functions, likelihood() and unlikely(), have been added to allow developers to give hints to the query planner without forcing the query planner into a particular decision.

Version 3.8.1 is the first SQLite release to take into account the estimated size of table and index rows when choosing a query plan. Row size estimates are based on the declared datatypes of columns. For example, a column of type VARCHAR(1000) is assumed to use much more space than a column of type INT. The datatype-based row size estimate can be overridden by appending a term of the form "sz=NNN" (where NNN is the average row size in bytes) to the end of the sqlite_stat1.stat record for a table or index. Currently, row sizes are only used to help the query planner choose between a table or one of its indices when doing a table scan or a count(*) operation, though future releases are likely to use the estimated row size in other contexts as well. The new PRAGMA stats statement can be used to view row size estimates.

Version 3.8.1 adds the SQLITE_ENABLE_STAT4 compile-time option. STAT4 is very similar to STAT3 in that it uses samples from indices to try to guess how many rows of the index will be satisfy by WHERE clause constraints. The difference is that STAT4 samples all columns of the index whereas the older STAT3 only sampled the left-most column. Users of STAT3 are encouraged to upgrade to STAT4. Application developers should use STAT3 and STAT4 with caution since both options, by design, violate the query planner stability guarantee, making it more difficult to ensure uniform performance is widely-deployed and mass-produced embedded applications.

2013-09-03 - Release 3.8.0.2

SQLite version 3.8.0.2 contains a one-line fix to a bug in the new optimization that tries to omit unused LEFT JOINs from a query.

2013-08-29 - Release 3.8.0.1

SQLite version 3.8.0.1 fixes some obscure bugs that were uncovered by users in the 3.8.0 release. Changes from 3.8.0 are minimal.

2013-08-26 - Release 3.8.0

Do not fear the zero!

SQLite version 3.8.0 might easily have been called "3.7.18" instead. However, this release features the cutover of the next generation query planner or NGQP, and there is a small chance of breaking legacy programs that rely on undefined behavior in previous SQLite releases, and so the minor version number was incremented for that reason. But the risks are low and there is a query planner checklist is available to application developers to aid in avoiding problems.

SQLite version 3.8.0 is actually one of the most heavily tested SQLite releases ever. Thousands and thousands of beta copies have be downloaded, and presumably tested, and there have been no problem reports.

In addition to the next generation query planner, the 3.8.0 release adds support for partial indices, as well as several other new features. See the change log for further detail.

2013-05-20 - Release 3.7.17

SQLite version 3.7.17 is a regularly schedule maintenance release. Visit the change log for a full explanation of the changes in this release.

There are many bug fixes in version 3.7.17. But this does not indicate that 3.7.16 was a problematic release. All of the bugs in 3.7.17 are obscure and are unlikely to impact any particular application. And most of the bugs that are fixed in 3.7.17 predate 3.7.16 and have been in the code for years without ever before being noticed. Nevertheless, due to the large number of fixes, all users are encouraged to upgrade when possible.

2013-04-12 - Release 3.7.16.2

SQLite version 3.7.16.2 fixes a long-standing flaw in the Windows OS interface that can result in database corruption under a rare race condition. See ​http://www.sqlite.org/src/info/7ff3120e4f for a full description of the problem.

As far as we know, this bug has never been seen in the wild. The problem was discovered by the SQLite developers while writing stress tests for a separate component of SQLite. Those stress tests have not yet found any problems with the component they were intended to verify, but they did find the bug which is the subject of this patch release.

Other than updates to version numbers, the only difference between this release and 3.7.16.1 is a two-character change in a single identifier, which is contained in the windows-specific OS interface logic. There are no changes in this release (other than version numbers) for platforms other than Windows.

2013-03-29 - Release 3.7.16.1

SQLite version 3.7.16.1 is a bug fix release that fixes a few problems that were present in the previous releases.

The primary motivation for version 3.7.16.1 is to fix a bug in the query optimizer that was introduced as part of version 3.7.15. The query optimizer was being a little overzealous in optimizing out some ORDER BY clauses, which resulted in sorting being omitted on occasions where sorting is required to get the correct answer. See ticket a179fe7465 for details.

In addition to the ORDER BY fix, several other patches to fix obscure (and mostly harmless) bugs and to fix spelling errors in source code comments are also included in this release.

2013-03-18 - Release 3.7.16

SQLite version 3.7.16 is a regularly scheduled release of SQLite. This release contains several language enhancements and improvements to the query optimizer. A list of the major enhancements and optimizations can be see on the change log.

There was one important bug fix (see Ticket fc7bd6358f) that addresses an incorrect query result that could have occurred in a three-way join where the join constraints compared INTEGER columns to TEXT columns. This issue had been in the code for time out of mind and had never before been reported, so we surmise that it is very obscure. Nevertheless, all users are advised to upgrade to avoid any future problems associated with this issue.

2013-01-09 - Release 3.7.15.2

SQLite version 3.7.15.2 is a patch release that fixes a single bug that was introduced in version version 3.7.15. The fix is a 4-character edit to a single line of code. Other than this 4-character change and the update of the version number, nothing has changed from version 3.7.15.1.

2012-12-19 - Release 3.7.15.1

SQLite version 3.7.15.1 is a patch release that fixes a single bug that was introduced in version version 3.7.15. The fix involved changing two lines of code and adding a single assert(). This release also includes some new test cases to prevent a regression of the bug, and the version number is increased, of course. But otherwise, nothing has changed from version 3.7.15.

2012-12-12 - Release 3.7.15

SQLite version 3.7.15 is a regularly schedule release of SQLite. This release contains several improvements to the query planner and optimizer and one important bug fix. This is the first release to officially support Windows 8 Phone.

The important bug fix is a problem that can lead to segfaults when using shared cache mode on a schema that contains a COLLATE operator within a CHECK constraint or within a view. Collating functions are associated with individual database connections. But a pointer to the collating function was also being cached within expressions. If an expression was part of the schema and contained a cached collating function, it would point to the collating function in the database connection that originally parsed the schema. If that database connection closed while other database connections using the same shared cache continued to operate, they other database connections would try to use the deallocated collating function in the database connection that closed. The fix in version 3.7.15 was to not cache collating function pointers in the expression structure but instead look them up each time a new statement is prepared.

This release also contains some important enhancements to the query planner which should (we hope) make some queries run faster. The enhancements include:

When doing a full-table scan, try to use an index instead of the original table, under the theory that indices contain less information and are thus smaller and hence require less disk I/O to scan.

Enhance the IN operator to allow it to make use of indices that have numeric affinity.

Do a better job of recognizing when an ORDER BY clause can be implemented using indices - especially in cases where the ORDER BY clause contains terms from two or more tables in a join.

2012-10-04 - Release 3.7.14.1

SQLite version 3.7.14.1 is a patch release. Changes from the baseline version 3.7.14 are minimal and are restricted to fixing three bugs.

One of the fixed bugs is a long-standing issue with the TCL interface. Another is an external compiler bug that SQLite merely works around and that only comes up if you are using the VisualStudio-2012 compiler to generate WinRT applications on ARM with optimizations enabled. The third problem is an SQLite core bug, introduced in version 3.7.14, that can cause a segfault if a query contains a LEFT JOIN that contains an OR in the ON clause.

2012-09-03 - Release 3.7.14

SQLite version 3.7.14 is a regularly scheduled maintenance release of SQLite. The previous release continues to work well. Upgrading is optional.

Version 3.7.14 drops native support for OS/2. We are not aware of any active projects that were using SQLite on OS/2 and since the SQLite developers had no way of testing on OS/2 it seemed like it was time to simply remove the OS/2 code from the SQLite tree. If there are OS/2 projects out there that still need SQLite support, they can continue to maintain their own private VFS which can be linked to SQLite at start-time using the sqlite3_vfs_register() interface.

The sqlite3_close_v2() interface has been added. The sqlite3_close_v2() interface differs from sqlite3_close() in that it is designed to work better for host language that use a garbage collector. With the older sqlite3_close() interface, the associated prepared statements and sqlite3_backup objects must be destroyed before the database connection. With the newer sqlite3_close_v2() interface, the objects can be destroyed in any order.

This release also includes performance improvements to the sort algorithm that is used to implement ORDER BY and CREATE INDEX. And the query planner has been enhanced to better use covering indices on queries that use OR terms in the WHERE clause.

2012-06-11 - Release 3.7.13

SQLite version 3.7.13 adds support for WinRT and metro style applications for Microsoft Windows 8. The 3.7.13 release is coming sooner than is usual after the previous release in order to get this new capability into the hands of developers. To use SQLite in a metro style application, compile with the -DSQLITE_OS_WINRT flag. Because of the increased application security and safety requirements of WinRT, all database filenames should be full pathnames. Note that SQLite is not capable of accessing databases outside the installation directory and application data directory. This restriction is another security and safety feature of WinRT. Apart from these restrictions, SQLite should work exactly the same on WinRT as it does on every other system.

Also in this release: when a database is opened using URI filenames and the mode=memory query parameter then the database is an in-memory database, just as if it had been named ":memory:". But, if shared cache mode is enabled, then all other database connections that specify the same URI filename will connect to the same in-memory database. This allows two or more database connections (in the same process) to share the same in-memory database.

This release also includes some corner-case performance optimizations that are obscure yet significant to an important subset of SQLite users. Getting these performance optimizations into circulation quickly is yet another reason for making this release so soon following the previous.

The next release of SQLite is scheduled to occur after the usual 2 or 3 month interval.

2012-05-22 - Patch Release 3.7.12.1

SQLite version 3.7.12.1 is a patch release for version 3.7.12 that fixes a bug that was introduced in version 3.7.12 and that can cause a segfault for certain obscure nested aggregate queries. There are very few changes in 3.7.12.1, and upgrading is only needed for applications that do nested aggregate queries.

2012-05-14 - Version 3.7.12

SQLite version 3.7.12 is a regularly scheduled maintenance release. This release contains several new optimizations and bug fixes and upgrading is recommended. See the change summary for details.

2012-03-20 - Version 3.7.11

SQLite version 3.7.11 is a regularly scheduled maintenance release which was rushed out early due to a bug in the query optimizer introduced in the previous release. The bug is obscure - it changes a LEFT JOIN into an INNER JOIN in some cases when there is a 3-way join and OR terms in the WHERE clause. But it was considered serious enough to rush out a fix. Apart from this one problem, SQLite version 3.7.10 has not given any trouble. Upgrading to version 3.7.11 from versions 3.7.6.3, 3.7.7, 3.7.7.1, 3.7.8, or 3.7.9 is optional. Upgrading from other releases, including the previous release 3.7.10, is recommended.

Other enhancements found in this release are enumerated in the change log.

2012-01-16 - Version 3.7.10

SQLite version 3.7.10 is a regularly scheduled maintenance release. Upgrading from version 3.7.6.3, 3.7.7, 3.7.7.1, 3.7.8, or 3.7.9 is optional. Upgrading from other releases is recommended.

The SQLITE_CONFIG_PCACHE mechanism has been replaced with SQLITE_CONFIG_PCACHE2. If you do not know what this mechanism is (it is an extreme corner-case and is seldom used) then this change will not effect you in the least.

The default schema format number for new database files has changed from 1 to 4. SQLite has been able to generate and read database files using schema format 4 for six years. But up unto now, the default schema format has been 1 so that older versions of SQLite could read and write databases generated by newer versions of SQLite. But those older versions of SQLite have become so scarce now that it seems reasonable to make the new format the default.

SQLite is changing some of the assumptions it makes above the behavior of disk drives and flash memory devices during a sudden power loss. This change is completely transparent to applications. Read about the powersafe overwrite property for additional information.

Lots of new interfaces have been added in this release:

sqlite3_db_release_memory() PRAGMA shrink_memory sqlite3_db_filename() sqlite3_stmt_busy() sqlite3_uri_boolean() sqlite3_uri_int64()

The PRAGMA cache_size statement has been enhanced. Formerly, you would use this statement to tell SQLite how many pages of the database files it should hold in its cache at once. The total memory requirement would depend on the database page size. Now, if you give PRAGMA cache_size a negative value -N, it will allocate roughly N kibibytes of memory to cache, divided up according to page size. This enhancement allows programs to more easily control their memory usage.

There have been several obscure bug fixes. One noteworthy bug, ticket ff5be73dee, could in theory result in a corrupt database file if a power loss occurred at just the wrong moment on an unusually cantankerous disk drive. But that is mostly a theoretical concern and is very unlikely to happen in practice. The bug was found during laboratory testing and has never been observed to occur in the wild.

2011-11-01 - Version 3.7.9

SQLite version 3.7.9 is a regularly scheduled maintenance release. Upgrading from version 3.7.6.3, 3.7.7, 3.7.7.1, and 3.7.8 is optional. Upgrading from other versions is recommended.

The SQLITE_ENABLE_STAT2 compile-time option is now a no-op. The enhanced query-planner functionality formerly available using SQLITE_ENABLE_STAT2 is now available through SQLITE_ENABLE_STAT3. The enhanced query planning is still disabled by default. However, future releases of SQLite might convert STAT3 from an enable-option to a disable-option so that it is available by default and is only omitted upon request.

The FTS4 full-text search engine has been enhanced such that tokens in the search string that begin with "^{" must be the first token in their respective columns in order to match. Formerly, "}" characters in the search string were simply ignored. Hence, if a legacy application was including "^{" characters in FTS4 search strings, thinking that they would always be ignored, then those legacy applications might break with this update. The fix is simply remove the "}" characters from the search string.

See the change summary for additional changes associated with this release.

2011-September-19 - Version 3.7.8

SQLite version 3.7.8 is a quarterly maintenance release. Upgrading from versions 3.7.6.3, 3.7.7, or 3.7.7.1 is optional. Upgrading from other versions is recommended.

This release features a new "external merge sort" algorithm used to implement ORDER BY and GROUP BY and also to presort the content of an index for CREATE INDEX. The new algorithm does approximately the same number of comparisons and I/Os as before, but the I/Os are much more sequential and so runtimes are greatly reduced when the size of the set being sorted is larger than the filesystem cache. The performance improvement can be dramatic - orders of magnitude faster for large CREATE INDEX commands. On the other hand, the code is slightly slower (1% or 2%) for a small CREATE INDEX. Since CREATE INDEX is not an operation that commonly occurs on a speed-critical path, we feel that this tradeoff is a good one. The slight slowdown for small CREATE INDEX statements might be recovered in a future release. ORDER BY and GROUP BY operations should now be faster for all cases, large and small.

The query planner has been enhanced to do a better job of handling the DISTINCT keyword on SELECT statements.

There has been a lot of work on the default VFSes. The unix VFS has been enhanced to include more overrideable system calls - a feature requested by Chromium to make it easier to build SQLite into a sandbox. The windows VFS has been enhanced to be more resistant to interference from anti-virus software.

Every version of SQLite is better tested than the previous, and 3.7.8 is no exception to this rule. Version 3.7.8 has been used internally by the SQLite team for mission critical functions and has performed flawlessly. And, of course, it passes our rigorous testing procedures with no problems detected. Version 3.7.8 is recommended for all new development.

2011-06-28 - Version 3.7.7.1

SQLite version 3.7.7.1 adds a one-line bug fix to 3.7.7 to fix a problem causing PRAGMA case_sensitive_like statements compiled using the legacy sqlite3_prepare() interface to fail with an SQLITE_SCHEMA error. Because sqlite3_exec() uses sqlite3_prepare() internally, the problem also affects sqlite3_exec().

Upgrading from 3.7.7 is only required for applications that use "PRAGMA case_sensitive_like" and the sqlite3_prepare() (or sqlite3_exec()) interface.

2011-06-24 - Version 3.7.7

SQLite version 3.7.7 is a regularly scheduled bi-monthly maintenance release. Upgrading from version 3.7.6.3 is optional. Upgrading from all prior releases is recommended.

This release adds support for naming database files using URI filenames. URI filenames are disabled by default (for backwards compatibility) but applications are encouraged to enable them since incompatibilities are likely to be exceedingly rare and the feature is useful. See the URI filename documentation for details.

Most of the other enhancements in this release involve virtual tables. The virtual table interface has been enhanced to support SAVEPOINT and ON CONFLICT clause processing, and the built-in RTREE and FTS3/FTS4 have been augmented to take advantage of the new capability. This means, for example, that it is now possible to use the REPLACE command on FTS3/FTS4 and RTREE tables.

The FTS4 full-text index extension has been enhanced to support the FTS4 prefix option and the FTS4 order option. These two enhancements are provided in support of search-as-you-type interfaces where search results begin to appear after the first keystroke in the "search" box and are refined with each subsequent keystroke. The way this is done is to do a separate full-text search after each key stroke, and add the "*" wildcard at the end of the word currently being typed. So, for example, if the text typed so far is "fast da" and the next character typed is "t", then the application does a full-text search of the pattern "fast dat*" and displays the results. Such capability has always existed. What is new is that the FTS4 prefix option allows the search to be very fast (a matter of milliseconds) even for difficult cases such as "t*" or "th*".

There has been a fair amount of work done on the FTS4 module for this release. But the core SQLite code has changed little and the previous release has not given any problems, so we expect this to be a very stable release.

2011-05-19 - Version 3.7.6.3

SQLite version 3.7.6.3 is a patch release that fixes a single bug associated with WAL mode. The bug has been in SQLite ever since WAL was added, but the problem is very obscure and so nobody has noticed before now. Nevertheless, all users are encouraged to upgrade to version 3.7.6.3 or later.

The bug is this: If the cache_size is set very small (less than 10) and SQLite comes under memory pressure and if a multi-statement transaction is started in which the last statement prior to COMMIT is a SELECT statement and if a checkpoint occurs right after the transaction commit, then it might happen that the transaction will be silently rolled back instead of being committed.

The default setting for cache_size is 2000. So in most situations, this bug will never appear. But sometimes programmers set cache_size to very small values on gadgets and other low-memory devices in order to save memory space. Such applications are vulnerable. Note that this bug does not cause database corruption. It is as if ROLLBACK were being run instead of COMMIT in some cases.

Bug Details

Transactions commit in WAL mode by adding a record onto the end of the WAL (the write-ahead log) that contains a "commit" flag. So to commit a transaction, SQLite takes all the pages that have changed during that transaction, appends them to the WAL, and sets the commit flag on the last page. Now, if SQLite comes under memory pressure, it might try to free up memory space by writing changed pages to the WAL prior to the commit. We call this "spilling" the cache to WAL. There is nothing wrong with spilling cache to WAL. But if the memory pressure is severe, it might be that by the time COMMIT is run, all changed pages for the transaction have already been spilled to WAL and there are no pages left to be written to WAL. And with no unwritten pages, there was nothing to put the commit flag on. And without a commit flag, the transaction would end up being rolled back.

The fix to this problem was that if all changed pages has already been written to the WAL when the commit was started, then page 1 of the database will be written to the WAL again, so that there will always be a page available on which to set the commit flag.

2011-04-17 - Version 3.7.6.2

SQLite version 3.7.6.2 adds a one-line bug fix to 3.7.6.1 that enables pthreads to work correctly on NetBSD. The problem was a faulty function signature for the open system call. The problem does not appear to have any adverse impact on any system other than NetBSD.

Upgrading from version 3.7.6.1 is only needed on NetBSD.

2011-04-13 - Version 3.7.6.1

SQLite version 3.7.6.1 fixes a single bug in 3.7.6 that can cause a segfault if SQLITE_FCNTL_SIZE_HINT is used on a unix build that has SQLITE_ENABLE_LOCKING_MODE set to 0 and is compiled with HAVE_POSIX_FALLOCATE.

Upgrading from 3.7.6 is only needed for users effected by the configuration-specific bug described above. There are no other changes to the code.

2011-04-12 - Version 3.7.6

SQLite version 3.7.6 is a regularly scheduled bi-monthly maintenance release of SQLite. Upgrading from version 3.7.5 is optional. Upgrading releases prior to 3.7.5 is recommended.

2011-02-01 - Version 3.7.5

SQLite version 3.7.5 is a regularly scheduled bi-monthly maintenance release of SQLite. Due to the discovery and fix of an obscure bug that could cause database corruption, upgrading from all prior releases of SQLite is recommended. This bug was found during code review and has not been observed in the wild.

This release adds new opcodes for the sqlite3_db_status() interface that allow more precise measurement of how the lookaside memory allocator is performing, which can be useful for tuning in applications with very tight memory constraints.

The sqlite3_vsnprintf() interface was added. This routine is simply a varargs version of the long-standing sqlite3_snprintf() interface.

The output from sqlite3_trace() interface has been enhanced to work better (and faster) in systems that use recursive extensions such as FTS3 or RTREE.

Testing with Valgrind shows that this release of SQLite is about 1% or 2% faster than the previous release for most operations.

A fork of the popular ADO.NET adaptor for SQLite known as System.Data.SQLite is now available on ​http://System.Data.SQLite.org/. The originator of System.Data.SQLite, Robert Simpson, is aware of this fork, has expressed his approval, and has commit privileges on the new Fossil repository. The SQLite development team intends to maintain System.Data.SQLite moving forward.

2010-12-08 - Version 3.7.4

SQLite version 3.7.4 is a regularly scheduled bi-monthly maintenance release of SQLite. Upgrading from version 3.7.2 and version 3.7.3 is optional. Upgrading from all other SQLite releases is recommended.

This release features full-text search enhancements. The older FTS3 virtual table is still fully supported, and should also run faster. In addition, the new FTS4 virtual table is added. FTS4 follows the same syntax as FTS3 but holds additional metadata which facilitates some performance improvements and more advanced matchinfo() output. Look for further full-text search enhancements in subsequent releases.

Also in this release, the EXPLAIN QUERY PLAN output has been enhanced and new documentation is provided so that application developers can more easily understand how SQLite is performing their queries.

Thanks to an account from the folks at ​http://www.devio.us/, OpenBSD has been added to the list of platforms upon which we test SQLite prior to every release. That list of platforms now includes:

Linux x86 & x86_64 MacOS 10.5 & 10.6 MacOS 10.2 PowerPC WinXP and Win7 Android 2.2 OpenBSD 4.7

The previous release of SQLite (version 3.7.3) has proven to be very robust. The only serious issue discovered was ticket 80ba201079 that describes an incorrect query result that can occur under very unusual circumstances. The ticket description contains details of the problem. Suffice it to say here that the problem is very obscure and is unlikely to effect most applications and so upgrading is optional. The problem is fixed, of course, in this release.

2010-October-08 - Version 3.7.3

SQLite version 3.7.3 is a regularly scheduled bi-monthly maintenance release of SQLite. Upgrading from version 3.7.2 is optional. Upgrading from all other releases is recommended.

This release adds two new interfaces (really just variations on existing interfaces). The sqlite3_create_function_v2() interface adds a destructor for the application-data pointer. The new sqlite3_soft_heap_limit64() interface allows the soft heap limit to be set to a value greater than 231.

The RTREE extension has been enhanced with the ability to have an application-defined query region. This might be used, for example, to locate all objects within the field of view of a camera.

The 3.7.3 release also includes some performance enhancements, including query planner improvements, documentation updates, and fixes to some very obscure bugs.

2010-August-24 - Version 3.7.2

SQLite version 3.7.2 fixes a long-standing bug that can cause the database free-page list to go corrupt if incremental_vacuum is used multiple times to partially reduce the size of a database file that contains many hundreds of unused database pages. The original bug reports together with links to the patch that fixes it can be seen here.

This bug has been in the code for at least a year and possibly longer. The bug has nothing to do with the versions 3.7.1 or 3.7.0 or any other recent release. The fact that the bug was discovered (and fixed) within hours of the 3.7.1 release is purely a coincidence.

The bug is impossible to hit without using incremental_vacuum and is very difficult to hit even with incremental_vacuum. And the kind of corruption that the bug causes can usually be fixed simply by running VACUUM. Nevertheless, because the bug can result in database corruption, it is recommended that all SQLite users upgrade to version 3.7.2 or later.

2010-August-23 - Version 3.7.1

SQLite version 3.7.1 is a stabilization release for the 3.7.x series. Other than the filesize-in-header bug that was fixed in version 3.7.0.1, no major problems have been seen in 3.7.0. Some minor corner-case performance regressions have been fixed. A typo in the OS/2 interface has been repaired.

A biggest part of the 3.7.1 release is a cleanup and refactoring of the pager module within SQLite. This refactoring should have no application-visible effects. The purpose was to reorganize the code in ways that make it easier to prove correctness.

The 3.7.1 release adds new experimental methods for obtained more detailed memory usage information and for controlling database file fragmentation. And the query planner now does a better job of optimizing the LIKE and GLOB operators.

This release increases the maximum size of database pages from 32KiB to 64KiB. A database with 64KiB pages will not be readable or writable by older versions of SQLite. Note that further increases in page size are not feasible since the file format uses 16-bit offsets to structures within each page.

2010-August-04 - Version 3.7.0.1

SQLite version 3.7.0.1 is a patch release to fix a bug in the new filesize-in-header feature of the SQLite file format that could cause database corruption if the same database file is written alternately with version 3.7.0 and version 3.6.23.1 or earlier. A performance regression was also fixed in this release.

2010-07-22 - Version 3.7.0

SQLite version 3.7.0 is a major release of SQLite that features a new transaction control mechanism using a write-ahead log or WAL. The traditional rollback-journal is still used as the default so there should be no visible change for legacy programs. But newer programs can take advantage of improved performance and concurrency by enabling the WAL journaling mode.

SQLite version 3.7.0 also contains some query planner enhancements and a few obscure bug fixes, but the only really big change is the addition of WAL mode.